The 9mm has a really short strain curve, with peak tension generally occurring as being the bullet exits the case. Using this type of reality coupled with the increased bearing surface and resistance while in the barrel of assorted 147-grain bullets, there just is just not plenty of Strength to reliably push them from extended barrels.

  TiteGroup will not be a sensible choice as it will get over pressure quickly in 9mm when loaded warm.   Id Actually Look into the BE forums, and appear exclusively at 9mm Key loads. Myself, I load 147s with TG for the cheater load :)

Many different manufacturing facility loads were examined for accuracy and velocity for a comparison for the handload data from the accompanying

EXCEPT: exact same load into old trusted Browning HiPower did similar 'not fairly enough' for responsible slide functionality.

If they move the plunk examination, I like the cartridge as extensive as possible. I'm not an authority And that i won’t say how long I’ve been reloading, but I wouldn’t be submitting nearly anything on any sight that will be unsafe to any one. All I do know is what performs for me in my guns also to consider anything I say, or anybody else for instance, as details to be assessed by the reader. The one cause I posted just about anything on these new bullets is simply because there is not any information accessible and following I bought them, I set out to take a look at for myself and report my personal results to help you a person come across a starting point.

WeeWilly reported: CFE Pistol isn't a real superior match for forty five ACP loads. It can be sort of sluggish and likes better pressures ahead of it cleans up, pressure you will not be getting with 45 Auto specs.

I went back out to property figuring I'd devote a pair several hours poking holes in paper. This time I took my Glock 26. The loads wouldn't cycle the action. I attempted my Beretta once more they usually had been great. Tried out my S&W, they labored wonderful. Again for the 26 - no go. I needed to up the load to 5.5 grains to receive it to cycle adequately.

Tests 45 ACP within the variety with CFE Pistol powder. I noticed that the load appeared to burn off cleanly and remaining minor residue about the gun.

This is certainly an older thread, you might not get a reaction, and could be reviving an old thread. Please take into account creating a new thread.

Some powders are effected by temperature,. Some get a bit more rapidly or slower determined by temps. Some powders meter better than others.

Some guns might clearly show excess pressure indications with CFE (or AC) before the specified electric power element is arrived at. In this case slower gunpowder must be applied because it is often the case that slower gunpowder will create a similar velocity but at minimized tension.

two grains of bullseye and Shooting five rounds at any given time with 5 three inch dots within the backer I shot all 25 rounds and they have been possibly throughout the same gap or chopping most of the identical gap. This really is with my Les Baer 1911 With all the Ultra Dot Purple Dot sight. I had been sitting as a result of my again but I was not using a relaxation. I do not have a Chrono. checking out the Lymans and Hornady guides I was capturing involving 725 to 750 FPS.

This may be very legitimate. I had here load data for the 115gr plated FP RN bullets I've, as well as the mentioned one.a hundred and fifty" seating depth performs great with that bullet in my guns. Relocating for the Berry's 124gr hybrid hollow points, there was no data for that about the Hodgdon Site for that bullet, just the Berry's 124gr HBRN TP which had the OAL outlined as 1.one hundred fifty".

Include to quote Only present this user #22 · Nov 26, 2014 I exploit here Titegroup for lite loads and was making use of Unique for whole loads nonetheless it bought hard to come by and nevertheless is all over listed here. Uncovered some Ramshot Sillouhette and designed the swap. So far so good.